Euphonix CS-2000 (Repair) Guide
|
Introduction
|
1. personal introduction (Pascal)
|
|
Introduction
|
2. personal introduction (Matthias) Euphonix technician for approx. 25 years
|
|
Introduction
|
Attention: Hazardous electrical voltages!
|
|
Introduction
|
Help us to built up a great euphonix database
|
|
Terminology
|
Debugging mode
|
|
Terminology
|
Frames/io-modules/town
|
|
Spare parts
|
List of spare parts
|
|
Spare parts
|
List of spare parts i have to buy in future...
|
|
Download
|
Schematics/Drivers/Software
|
|
Tips & tricks
|
How can i assign the Send-Buttons?
|
|
Tips & tricks
|
I want to send any channel to any other channel (routing)
|
|
Tips & tricks
|
Make groups
|
|
Tips & tricks
|
Reading/understanding the schematics
|
|
Tips & tricks
|
Remote the fader or equalizer from euphonix via Sequenzer
|
|
Tips & tricks
|
The bios setting of my motherboard
|
|
Tips & tricks
|
Useful "keyboard shortcuts"
|
|
Tips & tricks
|
Useful things & tools
|
|
Tips & tricks
|
Useful tips about Midi
|
|
Tips & tricks
|
PC
Replacing the iomega jazz drive/floppy/ide harddisk by newer hardware!
|
|
Tips & tricks
|
PC
Replacing the motherboard
|
|
Tips & tricks
|
PC
Where can i find a oscillator on the euphonix Cs2000?
|
|
Problem - General
|
How can i remote a snapshot via Midi?
|
|
Problem - General
|
in the DSC screen: "Code ack timeout updating console Firmware"
|
|
Problem - General
|
Midi Input Konfiguration (Motu Midi Interface)
|
|
Problem - General
|
Towers are getting to hot and you don't want to use a air conditioner
|
|
Problem - General
|
PC
Host computer (PC) dead
|
|
Problem - General
|
PC
Want to replace old PC with a new one?
|
|
Problem - Console
|
At a channel 10 in the input metering there is a signal, although M1,M2,L1-L4 there is no instrument!!!
|
|
Problem - Console
|
How can i deactivate the flying fader below in the DSC?
|
|
Problem - Console
|
I want to configure my mixing console individually, i.e. arrange the channel strips
|
|
Problem - Console
|
Unexplainably any LEDs on a channel strip light up and do not let you deactivate
|
|
Problem - Console
|
Unexplainably red triangle next to mic, and you can't delete it?
|
|
Problem - Console
|
Audio Channel
01.07.2024 - Pulsating noise on channel
|
|
Problem - Console
|
Audio Channel
01.08.2024 - Signal disappears with EQ boost
|
|
Problem - Console
|
Audio Channel
01.09.2024 - We hear crackling with EQ Boost
|
|
Problem - Console
|
Audio Channel
🔥🔥
Equalizer didn't work, EQ Bass, EQ High Middle on left channel
|
|
Problem - Console
|
Audio Channel
No metering signal, no input on M2
|
|
Problem - Console
|
Audio Channel
Metering
Metering is at 80%, no signal
|
|
Problem - Console
|
Audio Channel
Metering
Metering shows 100% full scale
|
|
Problem - Console
|
Audio Channel
Metering
Multitrack problem: MT-10/MT-12/MT-14/MT-16/MT-18/MT-20/MT-20/MT-22/MT-24
|
|
Problem - Console
|
Audio Channel
Metering
Noise problem on channel, like a sinus tone and crazy noise...
|
|
Problem - Console
|
Audio Channel
Metering
The measurement on channel 1 is only 30 %.
|
|
Problem - Console
|
DPU-Board
Metering
Metering of IO-Modul didn't work
|
|
Problem - Console
|
Master Section
Interference signal / Noise on St1 and St2 although all channels are off!
|
|
Problem - Console
|
Master Section
Monitor A only right channel is working
|
|
Problem - Console
|
Master Section
Monitor C don't work
|
|
Problem - Console
|
Master Section
No clean, "punchy" audio signal on Mon A, Mon B, Mon C
|
|
Problem - Console
|
Master Section
🔥🔥
The master fader St1 and St2 didn't work, the volume cannot be changed!
|
|
Problem - Console
|
Master Section
Power Supply
100th LEDs light up wildly jumbled at numerous channel strips + considerable noise at audio output St1
|
|
Problem - Console
|
Master Section
Power Supply
Bizarre noise on the chanel 9,10,11,12 at the same time from tower 2!
|
|
Problem - Console
|
Master Section
Power Supply
Interference frequency on voltage
|
|
Problem - Console
|
Master Section
Power Supply
Noise on master outputs (Stereos, Auxes, Monitor Outs) coming from a channel
|
|
Problem - Console
|
Master Section
Power Supply
🔥
Suddenly all VU-Meter from Tower get off and on the master all VU-Meter gets on maximum (ST1,ST2,Out)
|
|
Problem - Console
|
Metering
Mix Controller lights are off. Replace power supply unit
|
|
Problem - Console
|
PC
Replacing TFT LCD screen
|
|
Problem - Console
|
Power Supply
Short circuit on tower 1 or tower 2
|
|
Problem - Es108
|
ES108
Audiosignal ist verzerrt
|
|
Problem - Es108
|
ES108
Dynamic is showing "Es 108 booting" -> Contact problem 1
|
|
Problem - Es108
|
ES108
Dynamic is showing "Es 108 booting" -> Contact problem 2
|
|
Problem - Es108
|
ES108
Error/distorted input signal/input signal loses volume
|
|
Problem - Es108
|
ES108
Highpass/Lowpass didn't work on one channel, can't hear compressor on both channels when enabled
|
|
Problem - Es108
|
ES108
How can i assign the ES108a?
|
|
Problem - Es108
|
ES108
Incoming audio signal becomes quiet as soon as ES108 is switched on (DYN In)
|
|
Problem - Es108
|
ES108
Settings get lost when snapshot is recalled
|
|
Problem - Es108
|
ES108
Useful tips with ES108
|
|
Problem - Other
|
Lexicon MPX1 - Power Supply
|
|
Problem - Other
|
Roland SRV-330 - Störgeräusche (Rauschen, Brummen) auf den Outputs
|
